Waterproof Digital Cameras

Plastics are often used to protect computer monitors, cell phone screens, and other video displays from scratches, dust, and minor water sprays. They can also be used to protect still and video cameras not only from minor water sprays but even when submerged. This is precisely what the Aquapac Waterproof Camcorder Case 465 is for.

Made of thermoplastic polyurethane (TPU), the Aquapac 465 is transparent giving you a clear view of your video camera inside the bag including all its control knobs and buttons. It is also elastic which means that you can manipulate all those controls adjusting them to your desired settings for image composition. As the TPU is ultra-violet ray stabilized, it will not discolor nor will it be broken down due to exposure to sunlight.

Images are recorded through a hard lens window made of optical-quality LENZFLEX material so you are assured of clear and crisp videos faithfully reproducing the colors and motions of the subjects. And you can keep on recording even 15 feet underneath the water surface.

Water is kept out of the bag with the Aquaclip Sealing System. This consists of two elongated pieces of light injection-molded plastic, one of which features a “V” groove (female part) while the other has a matching “V” protrusion (male part). When the two are fastened to each other using levers on the male part with the open end of the bag in between them, the bag is hermetically sealed thus preventing the seepage of water inside. Being made of plastic, these are impervious to rust. They are fastened to the TPU bag by flexible clips.

Attached to the seals is a shoulder strap for carrying comfort. This, however, is detachable so that it will not interfere with your shooting especially underwater.

Plenty of camcorders can fit into the Aquapac Waterproof Camcorder Case 465. If yours is six inches from the front to the rear and 14 inches in girth, it will easily slide into the case for protection from water, and also dust and sand.

Ewa-marine manufactures a line of waterproof camcorder cases or housing designed to fit specific brands and models of camcorders from different manufacturers including Sony, JVC, Panasonic, and Canon to name a few. There are also cases that are meant to hold camcorders of any brand and model and to protect them from water. Whether these cases are meant for a specific model or for universal use, they have basically the same features.

These cases are made of double laminated PVC making them 100 percent waterproof up to 10 meters under water. The case is flexible enough to allow you to manipulate all of the camcorder’s controls. To allow light to pass through to the lens without distorting images, there is a glass port at the front of the case made of hardened optical grade glass.

The cases are equipped with straps at the top and bottom. These are colored gray but they are lined with yellow stripes for better visibility when under water. The straps at the top are intended for carrying the case, while those at the bottom are for the attachment of weights for better buoyancy. There is also a padded strap at the right side into which you can insert your hand when manipulating the play and record controls. The bottom of the case where the camcorder rests is supplied with a padding made of foam.

The sizes of the Ewa-marine waterproof cases vary with the different models. With the wide range of available sizes, you can be sure that there is one that fits your camcorder regardless of its brand and model.

The DiCAPac WP-S10 Waterproof Case is a lightweight, easy to load and use, waterproof case for SLR cameras. Waterproofing is effective up to a depth of five meters. These cases are tested for 30 minutes at that depth and at 0.5 water pressure.

This waterproof casing is made of PVC vinyl plastic with a polycarbonate flat lens port. The vinyl wraps the camera and keeps water out while the polycarbonate port serves as the opening through which light enters the lens. It is UV-coated to guarantee clear and sharp photos.

With these features, the DiCAPac WP-S10 is thus a perfect companion for your SLR camera whenever you want to take mementoes of your water adventures. You can go whitewater rafting, kayaking, swimming, snorkeling, fishing, skiing, sailing, diving, or simply bumming at the beach, and go home with a load of photos to show your family and friends.

This case can carry SLR cameras that have a maximum length of 120 mm, and lenses 50 mm to 150 mm in length. All camera controls are accessible. There are finger holes for clicking the shutter, as well as adjusting focus, zoom, shutter speed, and aperture.

The water is as great a place to have fun as on land. Indeed, there are many water sports we can enjoy like, to name a few, white water rafting, surfing, water or jet skiing, snorkeling, or scuba diving. Of course, you will want to have photos of your water adventures. And you will need something to shield your precious SLR camera from getting wet and falling into disrepair.

The Aquapac Waterproof SLR Case adequately performs this job. Most SLRs can fit into an Aquapac. The biggest size available has a width of 145 mm, a height of 120 mm, and a depth of 72 mm for the camera body. The enclosure for the lens is 100 mm long with a diameter of 80 mm.

The hard lens at the end of the lens tube is optically-clear. This enables the camera to take clear and sharp pictures, even when submerged five meters below the surface. The case’s patented Aquaclip effectively keeps water out notwithstanding water pressure at the said depth. All you need to do is to make sure that the case is properly aligned with the clamps and twist a couple of levers.

The case is made of thermoplastic polyurethane (TPU) that has been UV-stabilized. This means that the case is sturdy and will not break down nor fade with exposure to sunlight. It is also flexible, and this allows you to access and manipulate your camera’s knobs and buttons.

For hanging the camera on your neck or shoulder while it is in the case a shoulder strap is supplied. Its length can be adjusted to suit your preferences, and may even be detached should you wish to do so.

SLR cameras have obvious advantages over point-and-shoot models in terms of versatility, image quality, performance, and upgradability. At the moment, however, there appears to be no waterproof SLRs. Instead, there are waterproof casings available in the market that intended to allow all brands and models of SLRs to go scuba diving.

Among them is the ewa-marine U-A Waterproof SLR Camera Case. The U-A is actually of series of waterproof cases. These vary in terms of the depth of their waterproof capabilities and in size. The U-A and U-Az models are waterproof up to 20 meters and are intended for SLRs with or without a built-in pop-up flash. The U-A is for zoom lenses up to 170mm while U-AZ can handle a 230mm. The U-AX can dive up to 20 meters carrying an SLR with a top-mounted flash. The U-AXP and U-AXP100 can go even deeper to 50 meters with an SLR and its top-mounted flash. The U-AXP100 is a special version of the U-AXP that can accommodate a lens of 77mm, 82mm filter diameter and an internal focus.

Waterproofing to the great depths is possible with the case’s double laminated PVC construction. A pair of clamping rails that are resistant to corrosion even from sea water fit together perfectly, allowing them to withstand high water pressures. Three screw knobs tighten these rails. The lens port is an optically neutral, flat, and hardened glass that eliminates distortion of images, and that allows the unhampered operation of autofocus systems and the capture of clear and sharp images.

There are great potentials for extraordinary photographs in rivers, beaches, the open seas, and, perhaps even more so, under the waters. The ewa-marine U-A Waterproof SLR Camera Case allows you to take these pictures.